SI-TEX B-60-12 Bronze 12-Degree Tilted Element Transducer w/ Temp, 600W, 50/200 kHz

List Price $240When a low profile thru-hull transducer is needed, the SI-TEX B-60-12 Bronze 12-Degree Tilted Element Transducer with Temperature Sensor flush-style mount compensates for deadrise by angling the element inside the housing. This 600W 50/200 kHz dual frequency tilted element transducer is right for hulls with a deadrise angle between 8 and 15 degrees.

The dual frequency bronze B60-12 tilted element transducer by SI-TEX provides a vertical beam without a fairing - the ceramic element is tilted to provide built-in deadrise compensation inside the housing of the transducer. The resulting vertical beam provides excellent echo returns for more accurate depth sounder readings.

The SI-TEX B-60-12 bronze 12-degree tilted element transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing of the bronze dual beam transducer is given the correct orientation.

Key Features of the SI-TEX B-60-12 Bronze 12-Degree Tilted Element Transducer Sensor:
Depth and Temperature
50/200 kHz Dual Frequency Sonar
600w RMS
Bronze Thru Hull Mount
Includes Temperature Sensor
12 degree Tilted Element
45/12 degree Beam Angles
30 Foot Cable with 8-Pin Pigtail Connector

Installation Notes for bronze tilted element transducer:
Bronze housing recommended for fiberglass or wood hulls.
Never install a bronze housing in a metal hull, because electrolytic corrosion will occur.
Never install a metal housing in a vessel with a positive ground system.
For hulls with a deadrise angle between 8 and 15.

SI-TEX B-60-12 Bronze 12-Degree Tilted Element Transducer with Temperature, 600W, 50/200 kHz SKU#: 38547

(for CVS126, CVS128, SVS-650 fish finders / depth sounders)